BNG Commands

EKM BNG 202.88.230.169 nocekm n0c@ekm1 Show all sessions: show service id 100 ipoe session Show session by MAC/ IP: show service id 100 ipoe session mac b4:2a:0e:6c:80:62show service id 100 ipoe session ip-address 100.111.3.85 Clear session: clear service id 100 ipoe session sap pw-201:501 mac mac 48:00:33:f3:66:66clear service id 100 ipoe session sap pw-120:226 ip-address […]

Continue Reading

Thalassery Office Public IP – TL2277

TL2277, Asianet Satellite Communications Ltd GPON, ONU: dc19.e2d7.6718 IP: 202.88.224.198 TLCY_POP.AG# interface BDI3866 description ––– TL2277 – Thalassery Office – E Way Bill ip address 202.88.224.197 255.255.255.252 ip policy route-map tl2277 end route-map tl2277 permit 30match ip address tl2277set ip next-hop 10.129.0.61 ip access list extended tl2277 10 permit ip 202.88.224.196 0.0.0.3 any THALASERY_OPTI# gpon […]

Continue Reading

Firmware upgradation procedure for Optilink OLT & ONU

Step:1 – Copy firmware Vaikom-OPTI.3#copy ftp flash 202.88.231.35ftp user name[anonymous]?adlftp user password[anonymous]?123Source file name[]?img-20180509_133107.tarDestination file name[img-20180509_133107.tar]? (press enter here) Step:2 – Update ONU Vaikom-OPTI.3#gpon update-onu img-20180509_133107.tar interface gpON 0/6 1Are you sure to update the ONU(y/n)?y Step: 3 – Reboot ONU Vaikom-OPTI.3#gpon reboot onu interface GPON 0/6:1Are you sure to reboot the ONU(y/n)?y Step: 4 […]

Continue Reading

NATing for Office Connectivity

Sample configuration for an office network via CGNAT n/w: 172.16.28.144/29  231.4: RP/0/RSP0/CPU0:EKM-GW.ASR-9K#sh run | inc 172.16.28.144 172.16.28.144/29 202.88.231.3 172.16.28.144/29 202.88.231.3 Configuration: router static address-family ipv4 unicast 172.16.28.144/29 202.88.231.3 vrf ASNET-INunlimit-Chn address-family ipv4 unicast 172.16.28.144/29 202.88.231.3 231.3: RP/0/RSP0/CPU0:ASR9006-ISM# interface BVI1019 ipv4 address 172.16.28.145 255.255.255.248 ipv4 access-group cgnat-office ingress ! Access list: ipv4 access-list cgnat-office 20 permit […]

Continue Reading

EMTA file updates

As part of migration to Sterlite , we need to restrict the CPE behind cable modem to one as default due to flooding in BNG side. So created seperate files for EMTA . Please move the subscribers who are using voip ( Through EMTA ) service need to add bellow mentioned files. For those subscribers […]

Continue Reading

Shifting Networks from 50 to 3

Step1 Change routing on Gateway Change routing on NAS (Inventum/Mettle) Create Virtual Interface, ACL, and Subinterface on 3 Shut vlan on 50 Example: 231.50 – NOCCPOP-ROUTE.COLLECTOR# interface BDI1530 description Star City Cables ip address 202.88.229.41 255.255.255.248 secondary ip address 202.88.253.41 255.255.255.252 secondary ip address 172.17.12.1 255.255.255.0 no ip proxy-arp ip policy route-map starcab-chingavanam end route-map […]

Continue Reading

Routing for CGNAT via Mettle NAS

Configuration for natted private IPs routed throught Mettle. Here, for NAS 173, 1. routing: Gateway:VRF > core-60 > NAS 2. add private networks in ACL “gpon98” corresponding to the route map “MettleLimited” applied on the Te4/7 interface on core, which is the routing port, is connected to NAS’s WAN. eg: GW: router static address-family ipv4 […]

Continue Reading